Sricam 'Recording Failed' Error? Your Troubleshooting Guide
Receiving a "Recording Failed" notification from your Sricam camera can be alarming. The primary function of a security camera is to record footage, and when it fails, your security is compromised. This common error is almost always related to the microSD card used for local storage, although app settings can also be a factor. Fortunately, resolving this issue is usually straightforward. This guide will walk you through the causes and solutions to get your Sricam camera recording reliably again.
Understanding the "Recording Failed" Error
This error message is the camera's way of telling you it cannot write video data to the installed microSD card. The problem lies somewhere in the communication between the camera and the storage medium.
- SD Card is Full: If the card is full and not set to overwrite old footage, recording will stop.
- Corrupted Data: The file system on the card can become corrupted, preventing new data from being written.
- Incorrect Format: The camera requires the SD card to be in a specific format (usually FAT32), which might not be the default.
- Unsupported or Fake SD Card: The market is flooded with counterfeit and low-quality SD cards that lack the speed and endurance for continuous video recording.
- Firmware or App Glitch: A temporary software bug could be interfering with the recording process.
Step-by-Step Solutions for Sricam Recording Failures
Follow these steps in order. Most recording issues are solved within the first few steps.
### 1. Check Recording Settings in the Sricam App
First, let's ensure the camera is properly configured to record.
- Open the Sricam App: Select the camera you are having issues with.
- Go to Settings: Tap the gear icon to open the camera's settings menu.
- Find Record Settings: Look for an option labelled "Record," "Record Plan," or "Storage Settings."
- Enable Recording: Make sure that recording is turned on. You should have options for "Motion Detection Record" and "Timing Record" (continuous). Enable the mode you wish to use.
- Set Overwrite: Look for a "Loop Recording" or "Overwrite" option and ensure it is enabled. This allows the camera to automatically delete the oldest files when the card is full, which is essential for continuous operation.
### 2. Format the MicroSD Card Correctly
Formatting erases the card and prepares it with the correct file system for the camera. This is the most effective solution for many recording problems.
- Navigate to Storage Settings: In the Sricam app's camera settings, find the SD card management or storage section.
- Check Card Status: The app should show the SD card's capacity and status. If it says "unformatted" or shows an error, it needs formatting.
- Format the Card: Select the "Format SD Card" option. Acknowledge the warning that all data will be erased. The process will take a minute or two.
- Reboot the Camera: After formatting is complete, it's a good practice to reboot the camera from the app or by unplugging it for 30 seconds.
### 3. Verify Your MicroSD Card's Authenticity and Quality
If formatting doesn't help, the card itself might be the problem. Sricam cameras, like all security cameras, require high-quality, durable cards.
- Use Reputable Brands: Stick to well-known brands like SanDisk, Samsung, Kingston, or Lexar. Purchase from authorised sellers to avoid counterfeits.
- Choose High Endurance: Look for cards specifically labelled "High Endurance" or "for Video Monitoring." These are designed to withstand the constant writing and rewriting of data.
- Check the Class: Ensure your card is Class 10 or has a U3 speed rating. This is necessary for recording smooth HD video without errors.
### 4. Update Firmware and App
Software bugs can sometimes cause hardware to misbehave.
- Update the Sricam App: Go to the App Store (iOS) or Google Play Store (Android) and check for any updates to the Sricam application.
- Update Camera Firmware: In the camera's settings within the app, look for a "Device Update" or "Firmware Upgrade" option. If a new version is available, follow the instructions to install it.
### 5. Factory Reset the Camera
As a final resort, you can reset the camera to its factory default settings. This will erase all your configurations, including Wi-Fi settings.
- Find the Reset Button: Locate the physical reset button on the camera body.
- Press and Hold: With the camera powered on, press and hold the button for about 15-20 seconds until you hear a chime or see the indicator lights flash.
- Set Up Again: The camera is now reset. You will need to go through the initial setup process in the Sricam app again, including connecting it to your Wi-Fi and re-configuring your recording settings.
By following these steps, you can effectively diagnose and fix the "Recording Failed" error on your Sricam camera and restore its crucial recording capabilities.