A Complete Guide to Fixing Blink Camera Mounting Issues
You've successfully set up your Blink camera in the app, and now it's time for the final step: mounting it. However, you've run into some frustrating issues. Perhaps the camera's angle keeps drooping, the mount itself feels wobbly on the wall, or you're struggling to find a secure fitting. These problems can compromise the effectiveness of your entire security system, but fortunately, they are all fixable.
This guide will walk you through the most common Blink camera mounting issues, from drooping angles to insecure installations. We'll provide practical solutions and tips to ensure your camera is stable, secure, and perfectly positioned to monitor your property.
Diagnosing Your Blink Mounting Problem
Blink's mounting hardware is designed for simplicity, but this can also lead to specific problems. Let's identify what's going wrong.
The Camera Angle Keeps Drooping
This is one of the most frequent complaints. You set the perfect viewing angle, and a few hours or days later, you notice the camera is pointing towards the ground. This is especially common with the heavier Blink Outdoor cameras, as gravity puts constant pressure on the mount's joint. The cause is almost always a ball-and-socket joint that isn't sufficiently tightened.
The Mount Feels Loose or Wobbly
If the entire mounting unit feels insecure on the wall, the issue lies with the connection between the screw and the wall itself. This is not a fault of the mount but rather the installation method. It's a critical issue to fix, as a wobbly mount can lead to unstable video and could eventually fail.
Broken Plastic Mounting Clip
The small adapter that connects the Blink camera to the mount has plastic clips that can become brittle over time (especially outdoors) or break if excessive force is applied. If these clips are damaged, the camera will no longer attach securely to the mount.
Limited Mounting Surfaces
The standard Blink mount is designed to be screwed into a flat surface like a wall or wooden post. If you need to mount your camera on vinyl siding, a gutter, or another unconventional surface, the included hardware may not be suitable.
How to Solve Your Blink Mounting Issues for Good
Follow these targeted solutions to fix your specific mounting problem and achieve a stable, reliable setup.
Solution 1: Fixing a Drooping Camera Angle
- Dismount the Camera: Gently detach your Blink camera from the mounting adapter.
- Tighten the Joint: The mount has a threaded collar around the ball joint. Using your fingers, tighten this collar as much as you can. For extra torque, you can grip it with a rubber jar opener or a cloth. This increases the friction inside the joint.
- Re-mount and Test: Re-attach your camera and position it. It should now hold its angle much more securely. If it still droops, the mount may be faulty, or you might consider a more robust third-party mount.
Solution 2: Securing a Wobbly Mount
This issue is all about using the right wall anchor.
- For Plasterboard/Drywall: If you just put the screw directly into plasterboard, it will be loose. You need to remove the screw and install a proper plasterboard anchor. Drill a small hole, push the plastic anchor in until it's flush, and then drive the screw into the anchor. This will create a solid fixing.
- For Masonry/Brick: Similarly, you need to use a masonry drill bit to create a hole and insert a wall plug designed for brick or concrete. The screw then expands the plug for an incredibly secure fit.
Solution 3: Dealing with a Broken Clip
Unfortunately, a broken plastic mounting clip cannot be reliably repaired. Superglue or epoxy will likely fail, especially on an outdoor camera exposed to changing temperatures.
- The only safe solution is to replace the mount. You can buy official replacement mounts directly from Blink (via Amazon) or choose from a wide variety of third-party mounts that may offer more durability or flexibility.
Solution 4: Using Alternative Mounting Solutions
If the standard mount doesn't work for your location, don't worry. There is a huge ecosystem of third-party mounting accessories for Blink cameras.
- Vinyl Siding Clips: These clever hooks slide under your siding without the need for any drilling.
- Gutter Mounts: These use a C-clamp to attach to a gutter, giving you a high vantage point.
- Twist Mounts: These have a flexible gooseneck that can be wrapped around railings, branches, or pipes.
Frequently Asked Questions (FAQs)
Why does my Blink camera's viewing angle keep drooping?
Camera drooping is usually caused by a ball-and-socket joint that isn't tight enough. Try removing the camera, tightening the collar on the mount as much as possible, and then reattaching the camera. For heavier outdoor models, ensure the mount is rated for their weight.
The plastic clip on my Blink mount has broken. Can it be fixed?
The small plastic clips on the Blink mounting adapter can break if too much force is used. If this happens, the camera will no longer be secure. You will need to purchase a replacement mount. They are widely available online from Blink and third-party sellers.
Are there alternative mounting options for Blink cameras?
Yes, there is a wide market for third-party Blink mounts, including gutter mounts, vinyl siding clips, and flexible twist mounts. These can provide better positioning options if the included mount is not suitable for your desired location.
The entire mount feels wobbly on the wall. How do I fix this?
An insecure fitting is often due to using the wrong hardware for the wall type. Mounting into plasterboard without a wall anchor will always feel loose. Re-install using the correct anchors for your wall material to create a solid and secure base.